You can use the commissioning software CTSoft to create, save, and load parameter files. You can download CTSoft from our website You will also need the communications cable, CT-USB-CABLE.
Control Techniques Software Tools Downloads
You can alternatively use the SMARTCARD that comes with the drive to externally save the drive’s parameters and transfer them to other drives. To save parameters on the SMARTCARD insert it into the SMARTCARD slot on the front of the drive. Navigate to parameter 0.30 (or SE09 in the sub-block menu) and change the value to Prog. Press the red reset button on the keypad. This will write the parameters in the drive onto the card.
To transfer the parameters from the SMARTCARD onto a drive, insert the SMARTCARD into the desired drive. Navigate to parameter 0.30 (or SE09 in the sub-block menu) and change the value to READ. Press the red reset button on the keypad. This will write the parameters on the SMARTCARD onto the drive. Perform a parameter save.
See attached PDF for more detailed information on SMARTCARD use.
Comments
0 comments
Please sign in to leave a comment.